Lincoln Magnum® PRO Curve™ 300 Welding Gun - 10 ft

SKU: K2951-1

Magnum® PRO Curve™ 300 Welding Gun 10 ft. No Liner or Backend

• ALREADY HAVE A GUN. ORDER THIS AND RE-USE THE BACK END AND ORDER  A NEW LINER IF YOU REQUIRE ONE.

Magnum® PRO Semi-Automatic MIG welding gun with 300A 60% duty cycle. Designed to maximize performance and operator comfort.

Magnum® PRO Curve™ guns for MIG or flux-cored welding combine our classic curved handle with our Copper Plus® contact tips and Magnum® PRO gun expendables to deliver long hours of fabrication welding with less frequent tip and gun expendable parts changes.

Features:

• Industrial Grade Construction
• Lincoln Electric Copper Plus® Contact Tips - Larger tip diameter and mass improve heat dissipation to increase tip life.
• Curve™ Handle Design - Our Curve™ handle is lightweight and balanced, providing a comfortable grip to reduce fatigue.
• Rotating Gun Tube and Gun Hanger Clip - Allow any number of hand positions to reduce fatigue or fit into tight spaces.
• Simplified Expendable Parts Selection

WHATS INCLUDED:

• Contact Tip (Qty. 1)(KP2744-045)
• 5/8 in. (15.9 mm) Thread-On Gas Nozzle with 1/8 in. (3.2 mm) recess (KP2742-1-62R)
• Thread-On Diffuser (KP2746-1)

IF YOU NEED A CONNECTOR KIT AND LINER THESE ARE LISTED BELOW:

Connector Kits for LINCOLN WELDERS

K466-1 Connector Kit for smaller diameter wires  (Up to .052 in. (1.4 mm) Wire)

Fits the following Wire Feeders:

• LN-7 
• LN-8
• LN-9
• LN-25

K466-8 Connector Kit for larger diameter wires (1/16 in. (1.6 mm) and Larger Wire)

Fits the following Wire Feeders:

• LN-8
• LN-9
• LN-25

K466-10 Connector Kit

Fits the following Wire Feeders:

• LF-72
• LF-74 Series
• LN-25 PRO
• Power Feed™ 10 and 25 series

K466-6 Connector Kit

Fits the following Wire Feeders:

• POWER MIG® Series
• Power Wave® C300

CONNECTOR KITS FOR TWECO® ADAPTED MIG GUNS

K466-2 Connector Kits

Fits the following Tweco Connected Wire Feeders:

• No. 2
• No. 3
• No. 4 Guns (K466)
• No. 5 Guns (K613)

CONNECTOR KITS FOR MILLER® WIRE FEEDERS

MILLER® has a standard Mig Gun Connector that fits nearly all MILLER® Wire Feeders including most not listed below

K466-3 Connector Kit

• Intellimatic
• Sidekick
• D-51A
• Porto-Mig Millermatic 130, 200, MM-35
• S-42GL
• S-52A
• S-54ASwing Arc-Dual
• Swing Arc-Single S-32S
• 52D
• 54D
• 54E
• 60 Series

AVAILABLE MIG GUN LINERS For Wire Size 035-.045 (0.9-1.2)

• KP44-3545-15  15 FOOT
• KP44-3545-25  26 FOOT

AVAILABLE MIG GUN LINERS For Wire Size  .052-1/16 (1.3-1.6)

• KP44-116-15  15 FOOT
• KP44-116-25  26 FOOT

AVAILABLE MIG GUN LINERS For Wire Size 1/16-5/64 (1.6-2.0

• KP44-564-15  15 FOOT
• KP44-564-25  26 FOOT

RECOMENED FOR ALUMINUM WIRE SIZE  Aluminum(1) .035-3/64 (0.9-1.2)

• KP44N-3545-15  15 FOOT