Tech-rod® 55 Stick (SMAW) Electrode, 5/32x14 in, (3) 10 lb Easy Open Can

SKU: EL55156634

Tech-Rod® 55 FOR WELDING OF CAST IRON 5/32" X 10 LB SLEEVE (CAN)

AWS: ENiFe-C l

Features

• The welds are moderately hard and require carbide tipped tools for machining
• A preheat and inter-pass temperature of not less than 350°F is required during welding to prevent cracking
• Q2 Lot® - certificates showing actual deposit composition available online

Cast Iron can be one of the harder materials to weld for any beginner or anyone new to welding cast iron. There are so many variables when dealing with castings. You really need to know the actual material it is that you are trying to weld. This comes into play mostly when doing repairs. You are given a casting, and you are told it is cast iron, but what grade is it. Can it be welded? The best advise is to take the welding to a company who has extensive experience doing this type of welding. If you have a good casting and know what grade it is, then by all means feel free to give it your best. Also this rod can get very difficult to machine, depending on the circumstances.

DETAILS

Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online

Features:

• The welds are moderately hard and require carbide tipped tools for machining
• A preheat and inter-pass temperature of not less than 350°F is required during welding to prevent cracking
• Q2 Lot® - certificates showing actual deposit composition available online

Whats Included:

• (3) 10 lb Easy Open Can

Specifications

• Country of Origin: Mexico
• Warranty Length: 1 Year
• Consumables Material: Stick (SMAW) Electrode
• LECO Consumable Diameter: 5/32 x 14 in (4.0 x 350 mm)
• LECO Consumable Package: (3) 10 lb Easy Open Can
• Consumable Diameter (in): 5/32
• Consumable Diameter (mm): 4.0
• Consumable Length (in): 14
• Consumable Length (mm): 350
• Welding Process: SMAW
• Alloy Type: HSR