Millermatic 211 Mig Welder 120/240 Volt Welder

Price: $2,862.88 (package of 1)
Based on unit price: $2,862.88

✔In Stock

Brand:

Miller®

SKU #: 907614

This is a non-stocking item. Under normal circumstances please allow 5 days for shipment from supplier

Quantity

Add to cart

MSPR $2,862.88 | After Rebate $2,362.88

Description
Spec. Sheets
Rebate

EFFECTIVE July 1, 2025 - September 30, 2025

Details:

Welds material from 24-gauge to 3/8 in thick in a single pass. Uses 120V or 240V power.

Features:

Advanced Auto-Set™ now includes five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile.
Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
Quick Select™ drive roll makes setup quicker by offering three grooves—two for different size solid wire and a third for flux-cored wire.
Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord.
Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category.
The Millermatic 211 will be able to operate and provide full output when powered by generators with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
Cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.

Specifications:

Country of Origin: United States
Length: 20.5
Width: 11.25
Height: 12.5
Weight: 38
Max Open Circuit Voltage (VDC): 54
Rated Output: 150 A at 21.5 VDC, 40% duty cycle (240V),115 A at 19.8 VDC, 20% duty cycle (120V)
Spool Size: 8 in (203 mm)
Weld Output: CV
Material Type: Aluminum|Solid Steel|Flux Cored|Stainless
Amperage Min (A): 30
Amperage Max (A): 230
Amperage Range: 30 A - 230 A
Min Thickness - ga - Mild Steel (ga): 24
Min Wire Feed Speed - IPM (IPM): 60
Min Wire Diameter - in - Solid Steel (in): 0.023
Input Phase - To Be Deleted: 1Phase
Input Phase: 1-Phase
Max Wire Diameter - in - Solid Steel (in): 0.035
Display Min Thickness - Mild Steel: 24 ga.
Display Max Thickness - Mild Steel: 3/8 in.
Max Wire Feed Speed - IPM (IPM): 600
Min Thickness - mm - Mild Steel (mm): 0.6
Input Voltage: 110/115/120 V|220/230/240 V
Min Thickness - ga - Aluminum (ga): 18
Min Thickness - mm - Aluminum (mm): 1.2
Max Thickness - in - Mild Steel (in): 0.375
Max Thickness - in - Aluminum (in): 0.375
Max Wire Feed Speed - m/min (m/min): 15.2
Min Wire Feed Speed - m/min (m/min): 1.5
Display Max Thickness - Aluminum: 3/8 in.
Display Min Thickness - Aluminum: 18 ga
Max Wire Diameter - in - Stainless (in): 0.035
Max Wire Diameter - in - Flux Cored (in): 0.045
Max Wire Diameter - mm - Solid Steel (mm): 0.9
Max Wire Diameter - mm - Stainless (mm): 0.9
Max Wire Diameter - mm - Flux Cored (mm): 1.2
Min Wire Diameter - in - Stainless (in): 0.023
Min Wire Diameter - in - Flux Cored (in): 0.03
Min Wire Diameter - mm - Solid Steel (mm): 0.6
Min Wire Diameter - mm - Stainless (mm): 0.6
Min Wire Diameter - mm - Flux Cored (mm): 0.8
Current Type: DC
Weldable Metals: Aluminum|Stainless Steel|Steel
Input Hz: 50/60 Hz
Material Thickness Display: Aluminum 18 ga. (1.2 mm) - 3/8 in. (9.5 mm)|Mild Steel 24 ga. (0.5 mm) - 3/8 in. (9.5 mm)
Wire Diameter Display: Stainless 0.024 in. - 0.035 in.|Stainless 0.6 mm. - 0.9 mm.|Solid Steel 0.6 mm. - 0.9 mm.|Solid Steel 0.024 in. - 0.035 in.|Flux Cored 0.03 in. - 0.045 in.|Flux Cored 0.8 mm. - 1.2 mm.
Wire Feed Speed Display: 1.5 m/min - 15.2 m/min| 60 IPM - 600 IPM

Brochure

Certificate of Compliance

Download

How to Claim Your Miller Build with Blue™ Rebate

What you’ll need first

Your invoice or receipt (digital copy preferred) showing the qualifying Miller® product(s).
The serial number(s) of the purchased product(s).
If you qualified for the Additional Products bonus, circle or highlight the eligible Miller accessories or Hobart® filler metals and their prices on the same invoice.

Step-by-Step Instructions

1) Buy during the promo period
Purchase any eligible Miller® product(s) between July 1 and September 30, 2025 from a participating distributor (Lock 8).

2) Submit within 30 days
You must submit your rebate within 30 days of your purchase date.

3) Go to the rebate portal: https://millerrebatecenter.com/ca/
Select the Canadian program for “Build with Blue Q3 2025 – Summer Savings” and click “Submit Rebates.”

4) Tell them where you bought it
When prompted for the retailer/distributor, enter Lock 8 Equipment Inc. (and the location where you purchased).

5) Enter your purchase details
Provide your purchase date, product model/stock number, and serial number(s). If you’re claiming the Additional Products bonus, include the add-on items and amounts.

6) Upload your documents
Upload your invoice/receipt showing the retailer (Lock 8), purchase date, qualifying product(s), prices, and any add-on accessories or filler metals. Make sure the bonus items are circled or highlighted.

7) Review & submit
Double-check all information, then submit. You’ll receive a confirmation or tracking number — keep it for your records.

8) Track your claim
You can track your rebate status anytime using your confirmation number. Processing typically takes 6–8 weeks after validation.

Helpful Notes

One rebate submission is allowed per invoice.
Rebates are only available while supplies last and only on listed, qualifying products.
If you have questions, contact the Miller Rebate Center’s customer support team.