Millermatic 211 Mig Welder 120/240 Volt Welder

Details:

Welds material from 24-gauge to 3/8 in thick in a single pass. Uses 120V or 240V power.

Features:

• Advanced Auto-Set™ now includes five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile.
• Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
• Quick Select™ drive roll makes setup quicker by offering three grooves—two for different size solid wire and a third for flux-cored wire.
• Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord.
• Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
• Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category.
• The Millermatic 211 will be able to operate and provide full output when powered by generators with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
• Cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
• Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.

Specifications:

• Country of Origin: United States
• Length: 20.5
• Width: 11.25
• Height: 12.5
• Weight: 38
• Max Open Circuit Voltage (VDC): 54
• Rated Output: 150 A at 21.5 VDC, 40% duty cycle (240V),115 A at 19.8 VDC, 20% duty cycle (120V)
• Spool Size: 8 in (203 mm)
• Weld Output: CV
• Material Type: Aluminum|Solid Steel|Flux Cored|Stainless
• Amperage Min (A): 30
• Amperage Max (A): 230
• Amperage Range: 30 A - 230 A
• Min Thickness - ga - Mild Steel (ga): 24
• Min Wire Feed Speed - IPM (IPM): 60
• Min Wire Diameter - in - Solid Steel (in): 0.023
• Input Phase - To Be Deleted: 1Phase
• Input Phase: 1-Phase
• Max Wire Diameter - in - Solid Steel (in): 0.035
• Display Min Thickness - Mild Steel: 24 ga.
• Display Max Thickness - Mild Steel: 3/8 in.
• Max Wire Feed Speed - IPM (IPM): 600
• Min Thickness - mm - Mild Steel (mm): 0.6
• Input Voltage: 110/115/120 V|220/230/240 V
• Min Thickness - ga - Aluminum (ga): 18
• Min Thickness - mm - Aluminum (mm): 1.2
• Max Thickness - in - Mild Steel (in): 0.375
• Max Thickness - in - Aluminum (in): 0.375
• Max Wire Feed Speed - m/min (m/min): 15.2
• Min Wire Feed Speed - m/min (m/min): 1.5
• Display Max Thickness - Aluminum: 3/8 in.
• Display Min Thickness - Aluminum: 18 ga
• Max Wire Diameter - in - Stainless (in): 0.035
• Max Wire Diameter - in - Flux Cored (in): 0.045
• Max Wire Diameter - mm - Solid Steel (mm): 0.9
• Max Wire Diameter - mm - Stainless (mm): 0.9
• Max Wire Diameter - mm - Flux Cored (mm): 1.2
• Min Wire Diameter - in - Stainless (in): 0.023
• Min Wire Diameter - in - Flux Cored (in): 0.03
• Min Wire Diameter - mm - Solid Steel (mm): 0.6
• Min Wire Diameter - mm - Stainless (mm): 0.6
• Min Wire Diameter - mm - Flux Cored (mm): 0.8
• Current Type: DC
• Weldable Metals: Aluminum|Stainless Steel|Steel
• Input Hz: 50/60 Hz
• Material Thickness Display: Aluminum 18 ga. (1.2 mm) - 3/8 in. (9.5 mm)|Mild Steel 24 ga. (0.5 mm) - 3/8 in. (9.5 mm)
• Wire Diameter Display: Stainless 0.024 in. - 0.035 in.|Stainless 0.6 mm. - 0.9 mm.|Solid Steel 0.6 mm. - 0.9 mm.|Solid Steel 0.024 in. - 0.035 in.|Flux Cored 0.03 in. - 0.045 in.|Flux Cored 0.8 mm. - 1.2 mm.
• Wire Feed Speed Display: 1.5 m/min - 15.2 m/min| 60 IPM - 600 IPM