Tweco 400 amp Nozzle For use with 34CT Nozzle Insulator

SKU: 24CT-62S

MIG Nozzle,  Thrd, 5/8" SD 400A

Weldmark by Tweco WMK24 5/8" Threaded MIG Nozzle 400A (2 per PK)

Weldmark by Tweco WMK24 series MIG nozzle is ideal for standard duty welding applications up to 400 amps. Made of copper, with a threaded connection type, and a standard recessed short stop tip. Compatable with MIG guns such as Weldmark 400 Series, WeldSkill® 150, WeldSkill® 250, WeldSkill® 400, WeldSkill® WM250, WeldSkill® WM400, Professional Classic® No. 2, Professional Classic® No. 3, or Professional Classic® No. 4. The 0.625 in bore size is perfect for large corners and gaps. Packed in a hanging plastic bag, it is retail ready. Made in United States.

• Weldmark WMK24 Copper Threaded Connection Short Stop MIG Nozzle 5/8" Bore for MIG Guns up to 400Amps
• Weldmark by Tweco WMK24 series MIG nozzle, rated for standard duty up to 400 amps, copper, threaded connection type, standard recessed short stop tip, compatable with Weldmark 400 Series, WeldSkill® 150, WeldSkill® 250, WeldSkill® 400, WeldSkill® WM250, WeldSkill® WM400, Professional Classic® No. 2, Professional Classic® No. 3, or Professional Classic® No. 4 MIG guns, 0.625 in bore size.
• Easy identification - part number roll stamped on the outside surface
• Machined from a solid copper alloy bar that assures consistent dimensional stability and efficient dissipation of heat
• Nozzle features coarse threaded 145 tellurium copper - 1.07" outside diameter at the knurled flat section
• A separate nozzle insulator (WMK34CT) is used to thread onto the conductor tube and provide insulation to the nozzle
• Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint. However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace