Request Additional Information
Additional Information
Have questions? - Ask our representative about the product
Transtig 170 Job Site Welder Stick / Tig "Touch" High Frequency 120/240 Volt
✔
Brand:
Fronius
SKU #: 4,904,100,025
- New Products
- Rent Equipment
Price: $3,885.40 (package of 1)
Based on unit price: $3,885.40
Based on unit price: $3,885.40
Notes
Images
Price
- Description
- Spec. Sheets
SKU: 49,0410,0025
120 Volt | 20 Amp Circuit Performance:
- Best Tig Welder on 120 volts.
- Weld up to 140 amps for 4 minutes
- 100 amps continuous Arc on a 120 volt 20 amp circuit
220 Volt | 20 Amp Circuit Performance:
- Weld up to 170 amps at 40% duty cycle
- Weld up to 140 amps at 100% duty cycle
Extension Cords: (SKU: PC20 L6-20x100)
- Use up to 300 feet in length of Power Cord Extensions in either 120 or 240 Volt Configuration
COMES WITH
- SELECT YOUR OPTION / FLEX HEAD OR RIGID HEAD
- SELECT YOUR OPTION / FOOT PEDAL OR HAND CONTROL
- GROUND CLAMP, ELECTRODE HOLDER WHIP, ARGON HOSE AND REGULATOR
NOTE: UNIT IS AVAILABLE AS A RENTAL UNIT ONLY
SELECT THE RENTAL TAB FOR MORE INFO
SKU 49,0410,0025
FRONIUS TRANSTIG 170 DC STICK AND TIG WELDER
FEATURES:
- Highest Tig Welding Current at 120 Volts.
- 4,051,374 Hose Pack Available with Up/Down Heat Control.
ARC:
- Advanced Stable Arc while welding
TAC FUNCTION:
- With TAC, one spot is all it takes for tacking, because the pulsed arc sets the two weld pools in motion, making them jump together in next to no time, to make one single weld-pool. The TAC function is also very useful when welding light-gauge sheets without filler metal.
Supply Voltage Tolerance:
- The inverter technology can compensate for voltage fluctuations or an input voltage that is too low, so that the maximum output power is always supplied. This voltage can range from 96 volts to 265 Volts. An Extension Cord up to 100 Meters can be used to supply power to the inverter.
DUTY CYCLE:
TIG welding current 10 min/40 °C (104 °F), U1 = 230 V
- 40% D.C. 140 A (120 Volt) / 170 A (230 Volt)
- 60% D.C. 120 A (120 Volt) / 155 A (230 Volt)
- 100% D.C. 100 A (120 Volt) / 140 A (230 Volt)
Electrode welding current 10 min/40 °C (104 °F), U1 = 230 V
- 40% D.C. 100 A (120 Volt) / 150 A (230 Volt)
- 60% D.C. 90 A (120 Volt) / 120 A (230 Volt)
- 100% D.C. 80 A (120 Volt) / 110 A (230 Volt)
PART NUMBERS
- 4,051,384 Tig Torch Hose Pack Cable
- 44,0350,4409 Tig Torch Body TTB 220P 70d
- 4,046,110 Remote Foot Pedal with 16.4 ft. Control Cable
- 4,001,040 Power Cords (1) 120 Volt 15 Amp NEMA 5-15P / (1) 120 Volt 20 Amp NEMA 5-20p / (1) 250 Volt 20 Amp NEMA L6-20P
- 42,0510,0235 Tool Case No 85. Complete with one set of back wheels for moving around
- 42,0510,0103 Tig Welding Gloves (1) Pair Size 11
- 2,0001,3541 Gas Adapter (Threads onto back of machine to allow for standard "B" Argon Hose Fittings to connect)
- 44,0350,1675 Wear Part Kit (Tig Consumable Starter Package)
- 42,0510,0110 Welding Helmet Fazor 1000 Plus
