Fronius Accupocket Battery Welder with Stick and Tig process

DEMO AND  RENTAL UNITS AVAILABLE

SKU: 49,0410,0066 

FRONIUS BATTERY POWERED TIG / STICK WELDING MACHINE

HOTSTART:

• To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.

SOFTSTART:

• The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).

TAC:

• With TAC, one spot is all it takes for tacking, because the pulsed arc sets the two weld pools in motion, making them jump together in next to no time, to make one single weld-pool. The TAC function is also very useful when welding light-gauge sheets without filler metal.

TIG COMFORT STOP:

• At the end of the welding operation, the welding current is switched off automatically if a specific change is made to the arc length. This prevents the arc being unnecessarily elongated when the TIG welding torch is lifted off the workpiece to end the welding process. This results in a better weld result in the area of the end-crater, as the gas shield is maintained. With the AccuPocket, access to mains electricity is no longer necessary. Welding tasks involving up to eight 1/8" or up to eighteen 3/32" electrodes can be carried out autonomously. A small, compact 2 kVA generator is sufficient for welding applications on a larger scale. And all without any restrictions on welding power or the quality of the arc. The very latest functional design, with dimensions reduced to a minimum, a low weight and a robust construction, make AccuPocket the perfect partner on any construction site.

THREE DIFFERENT OPERATING MODES:

• Up to 18 electrodes (2.5 mm) 3/32" or 8 electrodes (3.2) 1/8" Generator-powered operation (2 kVA is sufficient) Stable arc for simultaneous charging and welding in hybrid mode

MOBILE AND ROBUST:

• Integrated battery 11 kg overall weight (without charger) Robust design for use in challenging conditions Lift Arc Tig Capable with external gas. (Functions controlled at the machine only)

ADVANTAGES OF THE ACCUPOCKET INCREASED ARC STABILITY THANKS TO BATTERY TECHNOLOGY:

• Easy electrode ignition due to high short-circuit currents Welding voltage independent of state of charge, no arc break Rutile, basic, CEL and special electrodes 6 - 1/8" (3.2) mm or 18 - 3/32"  (2.5) mm electrodes with full battery charge or 11.8 ft. (130 cm) TIG weld seam at 150 A

SAFE, HIGH-POWER BATTERY MEETS WELDING TECHNOLOGY:

• LiFePo4, 400 Wh No Memory Effect Low self discharge Voltage monitoring for all battery cells Protection from overcharging, deep discharge and overheating Rapid charging in 30 minutes (80% performance)