PFERD Mounted Flap Wheel, 2" x 1, 40 Grit, 1/4" Shank, Ceramic oxide CO-COOL

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading and result in cooler grinding.

Materials that can be worked:

• Aluminium
• Bronze
• Other non-ferrous metals
• Hard non-ferrous metal
• Stainless steel (INOX)
• Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
• Grey/nodular cast iron (GG/GJL, GGG/GJS)
• Cobalt-based alloys
• High-temperature-resistant materials
• Copper
• Soft non-ferrous metal
• Brass
• Nickel-based alloys (e. g. Inconell and Hasteloy)
• Steels up to 1,200 N/mm² (< 38 HRC)
• Cast steel
• Steel materials with a hardness over 54 HRC
• Steel, cast steel
• Annealed cast iron
• Titanium

Applications:

• Weld dressing
• Deburring
• Surface work
• Weld dressing
• Structuring (matt finishing, brush matting and satin finishing)
• Fine grinding in multiple steps

Drive types:

• Flexible shaft drive
• Straight grinder

Features:

• Conforms to contours due to high flexibility.
• Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.
• Can be used face-down very close to edges and in corners thanks to the flat, molded-core design.

Specifications:

• Grit: 40
• Diameter: 2"
• Shank Diameter: 1/4"
• Weight: 0.13448197981999999 lb
• Width: 1 Inch
• Country of Origin: Spain