Fronius TRANSSTEEL 2200C Multi-Process Stick/Tig/Mig Package. 120-220 Volt 230 amps

DEMO AND  RENTAL UNITS AVAILABLE

49,0410,0035 TRANSSTEEL 2200C MULTI-PROCESS

LOCK 8 CAN OFFER THIS WELDER AS A NEW PURCHASE, A RENTAL ITEM, SALE OF A DEMO UNIT, OR SALE OF A MACHINE FROM OUR RENTAL FLEET.

LOCK 8 ALSO CAN SUPPLY ALL OF THE WELDING GASES FOR THIS MACHINE, WEATHER YOU ARE A HOME CONSUMER, OR A LARGE COMMERCIAL CONTRACTOR.

LOCK 8 IN HOUSE CAPABILITIES INCLUDE CALIBRATION CERTIFICATES, AS WELL AS THE EXPERTISE TO TROUBLE SHOOT AND REPAIR ALL TYPES OF WELDING MACHINES.

MIG WELDS ALUMINUM RIGHT OUT OF THE BOX WITHOUT ANY ADDITIONAL ADD ONS.

TIG WELDS IN DC STRAIGHT POLARITY RIGHT OUT OF THE BOX WITHOUT ANY ADDITIONAL ADD ONS.

STICK WELDS MOST ELECTRODES OUT OF THE BOX WITHOUT ANY ADDITIONAL ADD ONS.

SYNERGIC MIG WELDING - LIFT ARC PULSED TIG WELDING - HOT START STICK ELECTRODE WELDING

• Holds up to 8 inch Diameter Spool with a 2" Bore
• Holds 1-2lb spools 4 inch in diameter
• Ready to Mig Weld Aluminum. No other options required to buy. 3/64" diameter wire recommended with machine plugged into a 230 Volt Circuit
• Synergic Mig Welding. Select the Material you wish to weld, The wire size and the gas. The machine does the rest.
• Light Weight at 33lbs. Great for the construction site. Can run up to 100 Meters (328 ft.) of Extension Cord. The machine compensates for any voltage drop and operates off the kilowatts available. Lock 8 can supply custom extension cord sets.
• Works great off generators, requiring only 20 amps of current at 220 Volts. At 120 Volts it can run on either a 15 amp or 20 amp circuit.
• IP23 Weather Rating
• 22.1 x 8.5 x 15 in. 33lbs

IT IS IMPORTANT TO UNDERSTAND DUTY CYCLES WHEN YOU COMPARE WELDING MACHINES. ALL MANUFACTURER'S HAVE THEIR OWN WAY OF ADVERTISING THIS VERY IMPORTANT FACT.

• LOCK 8 WILL DEMO ALMOST ANY MACHINE PRIOR TO YOU PURCHASING IT.
• OUR IN HOUSE CAPABILITIES  ARE VERY EXTENSIVE, AND WE ONLY WANT TO MAKE SURE YOU ARE SELECTING THE PROPER MACHINE FOR YOUR APPLICATION.
• OUR TECHNICAL STAFF IS ALWAYS AVAILABLE FOR ADVISE.

ALL DUTY CYCLES ARE RATED 10min/40 °C (104 °F)

MIG WELDING 230 VOLTS 20 AMPS CIRCUIT

10-210 AMPS - DUTY CYCLE 30%    170 AMPS 60%   150 AMPS 100%

MIG WELDING 120 VOLTS 20 AMPS CIRCUIT

10-135 AMPS - DUTY CYCLE 30%  120 AMPS 60% 105 AMPS 100%

MIG WELDING 120 VOLTS 15 AMPS CIRCUIT

10-105 AMPS - DUTY CYCLE 30%  95 AMPS 60%  80 AMPS 100%

TIG WELDING 230 VOLTS 20 AMP CIRCUIT

230 AMPS 30% DUTY CYCLE  200 AMPS 60%  170 AMPS 100%

TIG WELDING 120 VOLTS 20 AMP CIRCUIT

160 AMPS 30% DUTY CYCLE  150 AMPS 60%   130 AMPS 100%

TIG WELDING 120 VOLTS 15 AMP CIRCUIT

135 AMPS 30% DUTY CYCLE  120 AMPS 60%  105 AMPS 100%

STICK ELECTRODE WELDING 230 VOLTS 20 AMP CIRCUIT

180 AMPS 30% DUTY CYCLE   150 AMPS 60% DUTY CYCLE   130 AMPS 100% DUTY CYCLE

STICK ELECTRODE WELDING 120 VOLTS 20 AMP CIRCUIT

160 AMPS 30% DUTY CYCLE   150 AMPS 60% DUTY CYCLE   130 AMPS 100% DUTY CYCLE

STICK ELECTRODE WELDING 120 VOLTS 15 AMP CIRCUIT

90 AMPS 30% DUTY CYCLE   80 AMPS 60% DUTY CYCLE  70 AMPS 100% DUTY CYCLE

PACKAGE INCLUDES THE FOLLOWING COMPONENTS

• WELDER TransSteel 2200C MV/B 4,075,221,631 1
• MIG GUN Torch MTG 2100S/FSC/3m/45° 4,035,990 1
• TIG Torch TTG 2200A F/UD/4m 4,035,989 1
• WHIP Electrode Holder 43,0004 1
• 120 V 15 A Mains Cable 43,0004,5666 1
• 120 V 20 A Mains Cable 43,0004,5668 1
• 230 V 20 A Mains Cable 43,0004,5801 1
• Pressure Roll 44,0001,0012 1
• Drive Roll 1.2T 42,0001,6692 1
• Drive Roll 0.9/1.0 T 42,0001,6689 1
• Steel Inner Liner 1.2mm 40,0002,0042,005 1
• .035" Contact Tip 0.9mm 42,0001,4462 2
• 3/64" Contact Tip 1.2mm 42,0001,4464 2
• Bearing Roll 42,0408,0006 1
• Ground Cable 43,0004,0479 1
• Gas Hose 44,0001,3442 1